Lexmark E260d Series User Manual

An optional memory card can be purchased separately and attached to the system board. To install the memory
card:
1 Turn the printer off.
2 Access the system board.
3 Unpack the memory card.
Note: Avoid touching the connection points along the edge of the card.
4 Align the memory card with its connector on the system board.
5 Push open the latches on both ends of the memory connector.
Warning—Potential Damage: Memory cards are easily damaged by static electricity. Touch a grounded metal
surface before you touch a memory card.
Note: Memory cards designed for other printers may not work with your printer.
6 Push the memory card into the connector until the latches click into place.
Additional printer setup
18

Lexmark E260d Series Specifications

General

Print Technology	Monochrome Laser
Print Speed	Up to 35 ppm
Print Resolution	1200 x 1200 dpi
Processor Speed	400 MHz
Connectivity	USB 2.0, Parallel
Monthly Duty Cycle	Up to 50, 000 pages
Paper Output Capacity	150 sheets
Operating System Compatibility	Windows, Mac OS, Linux
Input Capacity	250-Sheet Input Tray
Media Types Supported	Card Stock, Envelopes, Labels, Plain Paper, Transparencies
Media Sizes Supported	A4, A5, Executive, Folio, Letter, Legal, Statement, Universal
Maximum Paper Size	8.5 x 14 inches
Duplex Printing	Standard
Recommended Monthly Page Volume	500 - 2, 500 pages