Lexmark E260dn Series User Manual

To replace the photoconductor kit:
1 Open the front door by pressing the button on the left side of the printer and lowering the front door.
2 Pull the photoconductor kit and toner cartridge together as a unit out of the printer by pulling on the toner
cartridge handle.
Note: The photoconductor kit and toner cartridge form a unit.
Place the unit on a flat, clean surface.
3 Press the button on the base of the photoconductor kit. Pull the toner cartridge up and out using the handle.
4 Unpack the new photoconductor kit.
Warning—Potential Damage: Be careful not to touch the photoconductor drum. Doing so may affect the print
quality of future print jobs.
Maintaining the printer
105

Lexmark E260dn Series Specifications

General

Print Technology	Monochrome Laser
Duplex Printing	Standard
Paper Input Capacity	250 sheets
Paper Output Capacity	150 sheets
Resolution	1200 x 1200 dpi
Memory	32 MB
Connectivity	USB 2.0, Ethernet
Media Sizes Supported	A4, A5, A6, Executive, Letter, Legal, Statement, Universal
Media Types Supported	Plain Paper, Card Stock, Transparencies, Envelopes, Paper Labels
Operating System Compatibility	Microsoft Windows, Apple Mac OS, Linux
Dimensions	378 x 391 x 259 mm
Weight	14.0 kg
Recommended Monthly Page Volume	250 - 2, 500 pages