Additional printer setup
Selecting a location for the printer
When selecting a location for the printer, leave enough room to open trays, covers, and doors. If you plan to install
any options, leave enough room for them also. It is important to:
• Make sure airflow in the room meets the latest revision of the ASHRAE 62 standard.
• Provide a flat, sturdy, and stable surface.
• Keep the printer:
– Away from the direct airflow of air conditioners, heaters, or ventilators
– Free from direct sunlight, humidity extremes, or temperature fluctuations
– Clean, dry, and free of dust
• Allow the following recommended amount of space around the printer for proper ventilation:
1
Rear 300 mm (12.0 in.)
2 Front 300 mm (12.0 in.)
3
Right side 200 mm (8.0 in.)
4
Left side 12.7 mm (0.5 in.)
5
Top 300 mm (12.0 in.)
Additional printer setup
14
To Next Page
Loading...
Need help?
General