ENERGY STAR
Applicable only to models with duplexing enabled.
Laser notice
The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR Subchapter J for Class I (1) laser
products, and elsewhere is certified as a Class I laser product conforming to the requirements of IEC 60825-1.
Class I laser products are not considered to be hazardous. The printer contains internally a Class IIIb (3b) laser that is
nominally a 7 milliwatt gallium arsenide laser operating in the wavelength of 655-675 nanometers. The laser system
and printer are designed so there is never any human access to laser radiation above a Class I level during normal
operation, user maintenance, or prescribed service condition.
Laser advisory label
A laser notice label may be affixed to this printer as shown:
Power consumption
Product power consumption
The following table documents the power consumption characteristics of the product.
Note: Some modes may not apply to your product.
Mode Description Power consumption (Watts)
Printing The product is generating hard-copy output from electronic inputs. 470 W
Copying The product is generating hard-copy output from hard-copy original
documents.
N/A
Scanning The product is scanning hard-copy documents. N/A
Ready The product is waiting for a print job. 12 W
Power Saver The product is in energy-saving mode. 11 W
Off The product is plugged into a wall outlet, but the power switch is turned
off.
N/A
Notices
146
To Next Page
Loading...
Need help?
General
