Lexmark E260dn Series User Manual

CHECK THE DARKNESS, BRIGHTNESS, AND CONTRAST SETTINGS
The Toner Darkness setting is too dark, the Brightness setting is too dark, or the Contrast setting is too high.
• From Print Properties, change these settings.
Note: This solution applies to Windows users only.
• From the Quality menu, change these settings.
THE PAPER MAY HAVE ABSORBED MOISTURE DUE TO HIGH HUMIDITY
• Load paper from a fresh package.
• Store paper in its original wrapper until you use it.
CHECK THE PAPER
Avoid textured paper with rough finishes.
CHECK THE PAPER TYPE SETTING
Make sure the Paper Type setting matches the paper loaded in the tray.
THE TONER CARTRIDGE MAY BE DEFECTIVE
Replace the toner cartridge.
Print is too light
These are possible solutions. Try one or more of the following:
CHECK THE DARKNESS, BRIGHTNESS, AND CONTRAST SETTINGS
The Toner Darkness setting is too light, the Brightness setting is too light, or the Contrast setting is too low.
• From Print Properties, change these settings.
Note: This solution applies to Windows users only.
• From the Quality menu, change these settings.
THE PAPER MAY HAVE ABSORBED MOISTURE DUE TO HIGH HUMIDITY
• Load paper from a fresh package.
• Store paper in its original wrapper until you use it.
Troubleshooting
135

Lexmark E260dn Series Specifications

General

Print Technology	Monochrome Laser
Duplex Printing	Standard
Paper Input Capacity	250 sheets
Paper Output Capacity	150 sheets
Resolution	1200 x 1200 dpi
Memory	32 MB
Connectivity	USB 2.0, Ethernet
Media Sizes Supported	A4, A5, A6, Executive, Letter, Legal, Statement, Universal
Media Types Supported	Plain Paper, Card Stock, Transparencies, Envelopes, Paper Labels
Operating System Compatibility	Microsoft Windows, Apple Mac OS, Linux
Dimensions	378 x 391 x 259 mm
Weight	14.0 kg
Recommended Monthly Page Volume	250 - 2, 500 pages