Lexmark E260dn Series User Manual

Menu item Description
PS SmartSwitch
On
Off
Sets the printer to automatically switch to PS emulation when a print job requires
it, regardless of the default printer language
Notes:
• On is the factory default setting.
• When the Off setting is used, the printer does not examine incoming data.
• When the Off setting is used, the printer uses PCL emulation if PCL SmartSwitch
is set to On. It uses the default printer language specified in the Setup menu
if PCL SmartSwitch is set to Off.
NPA Mode
Off
Auto
Sets the printer to perform the special processing required for bidirectional
communication following the conventions defined by the NPA protocol
Notes:
• Auto is the factory default setting.
• Changing this setting from the printer control panel and then exiting the
menus causes the printer to restart. The menu selection is updated.
Network Buffer
Disabled
Auto
3K to <maximum size allowed>
Sets the size of the network input buffer
Notes:
• Auto is the factory default setting.
• The value can be changed in 1K increments.
• The maximum size allowed depends on the amount of memory in the printer,
the size of the other link buffers, and whether Resource Save is set to On or
Off.
• To increase the maximum size range for the Network Buffer, disable or reduce
the size of the parallel and USB buffers.
• Changing this setting from the printer control panel and then exiting the
menus causes the printer to restart. The menu selection is updated.
Mac Binary PS
On
Off
Auto
Sets the printer to process Macintosh binary PostScript print jobs
Notes:
• Auto is the factory default setting.
• The Off setting filters print jobs using the standard protocol.
• The On setting processes raw binary PostScript print jobs.
Network Setup Reflects the network setup for your printer
Network Card menu
Menu item Description
View Card Status
Connected
Disconnected
Allows you to ascertain whether the Network Card is connected.
View Card Speed
Reflects the speed of a currently active network card.
Understanding printer menus
86

Lexmark E260dn Series Specifications

General

Print Technology	Monochrome Laser
Duplex Printing	Standard
Paper Input Capacity	250 sheets
Paper Output Capacity	150 sheets
Resolution	1200 x 1200 dpi
Memory	32 MB
Connectivity	USB 2.0, Ethernet
Media Sizes Supported	A4, A5, A6, Executive, Letter, Legal, Statement, Universal
Media Types Supported	Plain Paper, Card Stock, Transparencies, Envelopes, Paper Labels
Operating System Compatibility	Microsoft Windows, Apple Mac OS, Linux
Dimensions	378 x 391 x 259 mm
Weight	14.0 kg
Recommended Monthly Page Volume	250 - 2, 500 pages