32.yy Replace unsupported cartridge
Remove the toner cartridge, and then install a supported one.
34 Short paper
The paper in the selected tray is too short for the current print job.
Try one or more of the following:
• Load the appropriate paper in the tray.
• Press the arrow buttons until Continue appears, and then press to clear the message and continue printing.
• Check tray length and width guides and make sure the paper is properly loaded in the tray.
• For Windows users, check the Print Properties settings to make sure the print job is requesting the correct paper
size and type.
For Macintosh users, check the Print dialog settings to make sure the print job is requesting the correct paper
size and type.
• Check that the paper size is correctly set. For example, if the MP Feeder Size is set to Universal, make sure the
paper is large enough for the data being printed.
• Cancel the current print job.
35 Insufficient memory to support Resource Save feature
The printer lacks sufficient memory to save settings. Install additional memory, or press to disable Resource Save,
clear the message, and continue printing.
37 Insufficient memory for Flash Memory Defragment operation
Try one or more of the following:
• Press the arrow buttons until Continue appears, and then press to stop the defragment operation and
continue printing.
• Delete fonts, macros, and other data in printer memory.
• Install additional printer memory.
37 Insufficient memory to collate job
Try one or more of the following:
• Press the arrow buttons until Continue appears, and then press to print the portion of the job already stored
and begin collating the rest of the print job.
• Cancel the current print job.
38 Memory full
Try one or more of the following:
• Press the arrow buttons until Continue appears, and then press to clear the message.
• Cancel the current print job.
Troubleshooting
107
To Next Page
Loading...
Need help?
General
