Lexmark E360D series User Manual

Printing
This chapter covers printing, printer reports, and job cancelation. Selection and handling of paper and specialty
media can affect how reliably documents print. For more information, see “Avoiding jams” on page 92 and “Storing
paper” on page 46.
Printing a document
Printing a document
1 Load paper into a tray or feeder.
2 From the printer control panel Paper menu, set the Paper Size/Type to match the loaded paper.
3 Send the print job:
For Windows users
a With a document open, click File  Print.
b Click Properties, Preferences, Options, or Setup, and then adjust the settings as needed.
Note: To print on a specific size or type of paper, adjust the paper size or type settings to match the loaded
paper, or select the appropriate tray or feeder.
c Click OK, and then click OK.
For Macintosh users
a Customize the settings as needed in the Page Setup dialog:
1 With a document open, choose File > Page Setup.
2 Choose a paper size or create a custom size to match the loaded paper.
3 Click OK.
b Customize the settings as needed in the Print dialog:
1 With a document open, choose File > Print.
If necessary, click the disclosure triangle to see more options.
2 From the Print dialog and pop-up menus, adjust the settings as needed.
Note: To print on a specific paper type, adjust the paper type setting to match the loaded paper, or
select the appropriate tray or feeder.
3 Click Print.
Printing
49

Lexmark E360D series Specifications

General

Print Technology	Monochrome Laser
Print Resolution	1200 x 1200 dpi
Standard Memory	32 MB
Processor Speed	400 MHz
Print Speed	Up to 35 ppm
Input Capacity	250-Sheet Input Tray
Output Capacity	150 sheets
Media Types Supported	Plain Paper, Card Stock, Envelopes, Transparencies
Media Sizes Supported	Letter, legal, executive, A4, A5, B5, envelopes
Recommended Monthly Page Volume	750 to 3, 000 pages
Connectivity	USB 2.0
Print Languages	PCL 6, PostScript 3
Weight	14.0 kg
Supported Operating Systems	Windows, Linux, Mac OS X
Duplex Printing	Standard