EasyManuals Logo

Lexmark E360D series User Manual

Lexmark E360D series
144 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
4 Push the card firmly into place.
Notes:
• The entire length of the connector on the card must touch and be flush against the system board.
• Be careful not to damage the connectors.
5 Close the system board door.
Installing hardware options
Installing a 250- or 550-sheet drawer
CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more
trained personnel to move it safely.
Additional printer setup
19

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lexmark E360D series and is the answer not in the manual?

Lexmark E360D series Specifications

General IconGeneral
Print TechnologyMonochrome Laser
Print Resolution1200 x 1200 dpi
Standard Memory32 MB
Processor Speed400 MHz
Print SpeedUp to 35 ppm
Input Capacity250-Sheet Input Tray
Output Capacity150 sheets
Media Types SupportedPlain Paper, Card Stock, Envelopes, Transparencies
Media Sizes SupportedLetter, legal, executive, A4, A5, B5, envelopes
Recommended Monthly Page Volume750 to 3, 000 pages
ConnectivityUSB 2.0
Print LanguagesPCL 6, PostScript 3
Weight14.0 kg
Supported Operating SystemsWindows, Linux, Mac OS X
Duplex PrintingStandard

Related product manuals