Lexmark E360D series User Manual

An optional memory card can be purchased separately and attached to the system board. To install the memory
card:
1 Turn the printer off.
2 Access the system board.
3 Unpack the memory card.
Note: Avoid touching the connection points along the edge of the card.
4 Align the memory card with its connector on the system board.
5 Push open the latches on both ends of the memory connector.
Warning—Potential Damage: Memory cards are easily damaged by static electricity. Touch a grounded metal
surface before you touch a memory card.
Note: Memory cards designed for other printers may not work with your printer.
6 Push the memory card into the connector until the latches click into place.
Additional printer setup
16

Lexmark E360D series Specifications

General

Print Technology	Monochrome Laser
Print Resolution	1200 x 1200 dpi
Standard Memory	32 MB
Processor Speed	400 MHz
Print Speed	Up to 35 ppm
Input Capacity	250-Sheet Input Tray
Output Capacity	150 sheets
Media Types Supported	Plain Paper, Card Stock, Envelopes, Transparencies
Media Sizes Supported	Letter, legal, executive, A4, A5, B5, envelopes
Recommended Monthly Page Volume	750 to 3, 000 pages
Connectivity	USB 2.0
Print Languages	PCL 6, PostScript 3
Weight	14.0 kg
Supported Operating Systems	Windows, Linux, Mac OS X
Duplex Printing	Standard