Lexmark M3350

Menu item Description
E‑mail Alerts Setup
E‑mail Setup
Use SSL/TLS (Disabled*)
Send an e‑mail using an encrypted link.
E‑mail Alerts Setup
E‑mail Setup
Require Trusted
Certificate
(On*)
Require a trusted certificate when accessing the SMTP server.
E‑mail Alerts Setup
E‑mail Setup
SMTP Server Authentication (No
authentication required*)
Set the authentication type for the SMTP server.
E‑mail Alerts Setup
E‑mail Setup
Device‑Initiated E‑mail (None*)
Set whether credentials are required for device‑initiated
e‑mails.
E‑mail Alerts Setup
E‑mail Setup
User‑Initiated E‑mail (None*)
Set whether credentials are required for user‑initiated e‑mails.
Note: This menu item is available only in some printer
models.
E‑mail Alerts Setup
E‑mail Setup
Use Active Directory Device Credentials
(O*)
Enable user credentials and group designations to connect to
the SMTP server.
E‑mail Alerts Setup
E‑mail Setup
Device Userid
Specify the user ID to connect to the SMTP server.
E‑mail Alerts Setup
E‑mail Setup
Device Password
Specify the password to connect to the SMTP server.
E‑mail Alerts Setup
E‑mail Setup
Kerberos 5 REALM
Specify the realm for the Kerberos 5 authentication protocol.
E‑mail Alerts Setup
E‑mail Setup
NTLM Domain
Specify the domain name for the NTLM security protocol.
E‑mail Alerts Setup
E‑mail Setup
Disable “SMTP server not set up” error (O*)
Disable an SMTP setup error message to appear on the
display.
Error Prevention
Jam Assist
O
On*
Set the printer to check for jammed paper automatically.
Note: An asterisk (*) next to a value indicates the factory default setting.
Use printer menus 63