Menu item Description
Job Hold Timeout
0–255 (30*)
Set the time in seconds that the printer waits for user intervention before
it holds jobs that require unavailable resources.
Note: This menu item appears only when a hard disk or an ISD is
installed.
Download Target
RAM*
Disk
Specify where to save all permanent resources that have been
downloaded to the printer.
Note: This menu item appears only when a hard disk or an ISD is
installed.
Resource Save
O*
On
Determine what the printer does with downloaded resources when it
receives a job that requires more than the available memory.
Notes:
• When set to O, the printer retains downloaded resources only until
memory is needed. Resources associated with the inactive printer
language are deleted.
• When set to On, the printer preserves all the permanent
downloaded resources across all language switches. When
necessary, the printer shows memory full messages instead of
deleting permanent resources.
Print All Order
Alphabetical*
Newest First
Oldest First
Specify the order when you choose to print all held and confidential jobs.
Note: An asterisk (*) next to a value indicates the factory default setting.
Quality
Menu item Description
Print Resolution
600 dpi
1200 Image Q*
2400 Image Q
1200 dpi
300 dpi
Set the resolution for the printed output.
Pixel Boost
O*
Fonts*
Horizontally
Vertically
Both directions
Enable more pixels to print in clusters for clarity, to enhance images horizontally
or vertically or to enhance fonts.
Toner Darkness
1 to 10 (8*)
Determine the lightness or darkness of text images.
Note: An asterisk (*) next to a value indicates the factory default setting.
Use printer menus 73
To Next Page
Loading...
