Lexmark MX710 - Understanding the Basic Functions of the Scanner

Fully configured model
The following illustration shows the maximum number of optional trays that are supported by the printer. For more
information on other configurations, visit
www.lexmark.com/multifunctionprinters.
4
1
2
3
1 Optional 550‑sheet tray
2 Optional 250‑sheet trays
3 Caster base
4 Optional 2100‑sheet tray
When using optional trays:
• Always use a caster base when the printer is configured with an optional 2100‑sheet tray.
• The optional 2100‑sheet tray must always be at the bottom of a configuration.
• A maximum of four optional trays may be configured with the printer.
• The optional 250‑ and 550‑sheet trays may be installed in any order.
Understanding the basic functions of the scanner
• Make quick copies or set the printer to perform specific copy jobs.
• Send a fax using the printer control panel.
• Send a fax to multiple fax destinations at the same time.
• Scan documents and send them to your computer, an e-mail address, a flash drive, or an FTP destination.
• Scan documents and send them to another printer (PDF through an FTP).
Learning about the printer 14