Lexmark MX710 User Manual

– Have metal clasps, string ties, or folding bars.
– Have an interlocking design.
– Have postage stamps attached.
– Have any exposed adhesive when the flap is in the sealed or closed position.
– Have bent corners.
– Have rough, cockle, or laid finishes.
• Adjust the width guides to fit the width of the envelopes.
• Before loading the envelopes on the tray, flex and fan the envelopes to loosen them. Straighten the edges on a
level surface.
Note: A combination of high humidity (over 60%) and high printing temperature may wrinkle or seal envelopes.
Tips on using labels
• From the printer control panel, set the paper size, type, texture, and weight in the Paper menu to match the labels
loaded in the tray.
• Print samples on the labels being considered for use before buying large quantities.
• For more information on label printing, characteristics, and design, see the Card Stock & Label Guide on the Lexmark
Web site at
http://support.lexmark.com.
• Use labels designed specifically for laser printers.
• Do not use labels with slick backing material.
• Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a jam. Partial sheets
also contaminate the printer and the cartridge with adhesive, and could void the printer and toner cartridge
warranties.
• Do not use labels with exposed adhesive.
Tips on using letterhead
• Use letterhead designed specifically for laser printers.
• Print samples on the letterhead being considered for use before buying large quantities.
• Before loading letterhead, flex and fan the sheets to prevent them from sticking together.
• Page orientation is important when printing on letterhead.
Source Printing Printable side Paper orientation
Trays One‑sided Facedown Load the sheet with the
top edge toward the front
of the tray.
Trays Two‑sided Faceup Load the sheet with the
bottom edge entering the
printer first.
Multipurpose feeder One‑sided Faceup Load the sheet with the
top edge entering the
printer first.
Note: Check with the manufacturer or vendor to determine whether the preprinted letterhead is acceptable for laser
printers.
Printing 93

Lexmark MX710 Specifications

General

Print Technology	Monochrome Laser
Print Resolution	1200 x 1200 dpi
Scan Type	Flatbed, ADF
Duplex Printing	Yes
Monthly Duty Cycle	Up to 300, 000 pages
Functions	Print, Copy, Scan, Fax
Fax Speed	33.6 Kbps
Mobile Printing	Yes
Operating Systems Supported	Windows, Mac OS, Linux
ADF Capacity	100 sheets
Maximum Memory	3072 MB
Standard Input Capacity	650 pages
Maximum Input Capacity	3, 300 sheets
Standard Output Capacity	500 pages
Display	color touch screen
Connectivity	USB, Gigabit Ethernet
Processor	800 MHz
Hard Disk	320 GB
Scan Resolution	600 x 600 dpi
Standard Memory	1 GB
Scan Speed	Up to 70 spm