Lexmark MX710 - Supported Paper Types and Weights

Paper size
1
Dimensions 250‑ or
550‑sheet
trays
2100‑sheet
tray
Multipurpose
feeder
Duplex ADF Scanner
glass
Executive 184 x 267 mm
(7.3 x 10.5 in.)
X
Oficio (México) 216 x 340 mm
(8.5 x 13.4 in.)
Folio 216x 330 mm
(8.5 x 13 in.)
Statement 140 x 216 mm
(5.5 x 8.5 in.)
X
Universal
2
105 x 216 mm to
216 x 356 mm
(4.13 x 8.5 in. to
8.5 x 14 in.)
X
7 3/4 Envelope
(Monarch)
98 x 191 mm
(3.9 x 7.5 in.)
X XX
9 Envelope 98 x 225 mm
(3.9 x 8.9 in.)
X XX
10 Envelope 105 x 241 mm
(4.1 x 9.5 in.)
X XX
DL Envelope 110 x 220 mm
(4.3 x 8.7 in.)
X XX
C5 Envelope 162 x 229 mm
(6.38 x 9.01 in.)
X XX
B5 Envelope 176 x 250 mm
(6.93 x 9.84 in.)
X XX
Other Envelope 98 x 162 mm
(3.9 x 6.4 in.) to
176 x 250 mm
(6.9 x 9.8 in.)
X XX
1
If your preferred default paper size cannot be set in the printer control panel, then you may select common paper sizes
that correspond to the position of the length guide in the tray from the Paper Size/Type menu. If the paper size is not
available, then select Universal or turn off tray size sensing. For more information, contact customer support.
2
To support two‑sided (duplex) printing, the Universal width must be between 105 mm (4.13 inches) and 216 mm
(8.5 inches); the Universal length must be between 216 mm (8.5 inches) and 356 mm (14 inches).
3
Paper is supported in long‑edge orientation.
Supported paper types and weights
The printer engine supports 60–176‑g/m
2
(16–47‑lb) paper weights.
Note: Labels, transparencies, envelopes, and card stock always print at reduced speed.
Paper and specialty media guide 87