Lexmark T656 - Post 4-State Bar Code Descriptors; Australian Post 4-State Bar Code; Singapore Post 4-State Bar Code

Post 4-State bar code descriptors
77
Post 4-State bar code descriptors
Australian post 4-state bar code
Singapore post 4-state bar code
Key Range Default value Description
/Symbology /AustralianPostal Symbology identification
/Bars 40-60 (dec) 50 (dec)
[integer]
Sets the bar width in 1/100 mm
/Spaces 22-25 (dec) 24 (dec)
[integer]
Sets the number of bars that print per inch
/TrackerHeight 100-160 (dec) 130 (dec)
[integer]
Sets the tracker height in 1/100 mm
/Ascender,
Descender Offset
160-210 (dec) 185 (dec)
[integer]
Sets the ascender and descender offset in
1/100 mm; the total height of an ascender or
descender will be the sum of this field and the
tracker height
/FCC 11 (dec)
45 (dec)
59 (dec)
62 (dec)
11 (dec)
[integer]
Sets the FCC
/Encoding 0 for C table
1 for N table
0 (dec)
[integer]
Sets the encoding table
/QuietZone [int int] 150 150 (dec)
[array of integers]
Optional; in /Units
/Units 1/100 mm
Key Range Default value Description
/Symbology /SingaporePostal Symbology identification
/Bars 38-63 (dec) 50 (dec)
[integer]
Sets the bar width in 1/100 mm
/Spaces 20-24 (dec) 22 (dec)
[integer]
Sets the number of bars that print per inch
/TrackerHeight 102-152 (dec) 127 (dec)
[integer]
Sets the tracker height in 1/100 mm
/Ascender,
Descender Offset
160-216 (dec) 188 (dec)
[integer]
Sets the ascender and descender offset in 1/
100 mm; the total height of an ascender or
descender will be the sum of this field and the
tracker height
/QuietZone [int int] 150 150 (dec)
[array of integers]
Optional; in /Units
/Units 1/100 mm