Lexmark T656 - Itf-14

Two-dimensional bar codes
83
ITF-14
Key Type Range Default value Description
/Symbology name n/a n/a Required.
/ITF14
/Units name /300ths
/600ths
/1200ths
/600ths Optional.
/Units is used in the calculations below.
/Height int Min: 307 (dec)
01 33 (hex)
Max: Ther is no
maximum
value, but
larger bar
codes may use
up too much
memory.
•756 (dec)
or
•02 F4 (hex)
Optional.
Note: Values that go beyond the
defined range will be appropriately
clipped and set to the minimum and
maximum values.
Note: Bar Height does not include the
bearer bars.
Represents the Bar Height in /Units.
/Bars [int int] Min: [12 27]
(dec)
Max: [24 72]
(dec)
Note: The
range of values
for Bar Width 2
is dependent
on the value of
Bar Width 1,
where, Min =
2.25 x Bar
Width 1
Max = 3 x Bar
Width 1
• [12] (dec)
or
• [00 0C]
(hex)
Note: The
default value
for Bar Width
2 is
dependent on
the value of
Bar Width 1,
where Default
= 2.50 x Bar
Width 1
Optional.
Note: Values that go beyond the
defined range will be appropriately
clipped and set to the minimum and
maximum values.
Represents the Bar Widths in /Units.
/Spaces [int int] Min: [12 27]
(dec)
Max: [24 72]
(dec)
Note: The
range of values
for Space
Width 2 is
dependent on
the value of
Space Width 1,
where Min =
2.25 x Space
Width 1
Max = 3 x
Space Width 1
Space Width
1:
• 12 (dec)
or
• 00 0C (hex)
Optional.
Note: Values that go beyond the
defined range will be appropriately
clipped and set to the minimum and
maximum values.
Represents the Space Widths in /Units.