Lexmark T656 - Dutch Post 4-State Bar Code; Swiss Postal

Post 4-State bar code descriptors
79
Dutch post 4-state bar code
Swiss postal
Key Range Default value Description
/Symbology /DutchPostal Symbology identification
/Bars 38-63 (dec) 50 (dec)
[integer]
Sets the bar width in 1/100 mm
/Spaces 20-24 (dec) 22 (dec)
[integer]
Sets the number of bars that print per inch
/SyncBarHeight 102-152 (dec) 127 (dec)
[integer]
Sets the synchronization bar height in
1/100 mm
/UpDnBarHeight 160-216 (dec) 188 (dec)
[integer]
Sets the upward and downward bar height in
1/100 mm
/QuietZone [int int] [150 150]
[array of
integers]
Optional; in /Units
/Units 1/100 mm (optional)
Key Range Default value Description
/Symbology /SwissPostal Symbology identification
/HeightUnits 0-4 (dec) 4 (dec)
[integer]
Specifies units used for /BarHeight dimensions:
0 = Use default value
1 = 1/300 inch units
2 = 1/600 inch units
3 = 1/1200 inch units
4 = 1/720 inch units
/Height see note below 653 (dec)
[integer]
Height of bars
/WidthUnits 0-4 (dec) 2 (dec)
[integer]
Specifies units used for /BarWidth and /
SpaceWidth dimensions:
0 = Use default value
1 = 1/300 inch units
2 = 1/600 inch units
3 = 1/1200 inch units
4 = 1/720 inch units
If /WidthUnits is specified, it takes precedence
over /Units.
/Width 0.40-0.51 mm
0.0157-0.0200
inches
11 (dec)
[integer]
Bar width
Default is 11/600 inch
/SpaceWidth 0.40-0.51 mm
0.0157-0.0200
inches
11 (dec)
[integer]
Space width
Default is 11/600 inch