Lexmark T656 - ;Micropdf417

Arguments for MaxiCode bar code symbology
90
MicroPDF 417
Key Type Range Default value Description
/Symbology name n/a n/a Required.
/MicroPDF417
/Units name /300ths
/600ths
/1200ths
/600ths Optional.
/Units is used for /ModuleWidth and
/ModuleHeight calculations below.
/ModuleWidth int 240-12000
(dec)
•945 (dec)
or
•03 B1 (hex)
Optional.
Note: Values that go beyond the defined
range will be appropriately clipped and set
to the minimum and maximum values.
Sets the X dimension of the module (white
or black rectangle) in 100th of an inch. To
set the X dimension to “default” at 600 DPI
requires a value of 9.45, which is specified
here as 945, or 945 decimal.
/ModuleHeight int 480-
60000 (dec)
Note: The
range of Y
dimension is
dependent on
the value of X
dimension,
such that,
Min = 2 *
Xdimension
Max = 5 *
Xdimension
• 1890 (dec)
or
• 07 62 (hex)
Optional.
Note: Values that go beyond the defined
range will be appropriately clipped and set
to the minimum and maximum values.
Sets the Y dimension of the module (white
or black rectangle) in 100th of an inch. To
set the Y dimension to “default” at 600 DPI
requires a value of 18.9, which is specified
here as 1890 decimal.
/Rows int Note: 4-44
(dec)
• 0 (dec)
or
•00 (hex)
Optional.
Automatic operation specified by using 0.
/Columns int 1-4 (dec) • 0 (dec)
or
•00 (hex)
Optional.
Automatic operation specified by using 0.