Two-dimensional bar codes
82
The Bar and Space Widths of HIBC should follow these ratios:
• For HIBC 39: 1:3 = Bar/Space Width 1 : Bar/ Space Width 2
• For HIBC 128: 1:2:3:4 = Bar/Space Width 1 : Bar/ Space Width 2 : Bar/Space Width 3 : Bar/
Space Width 4
When an invalid value is supplied for Bar/Space Widths 2, 3 or 4, the values of Bar Width 1 and
Space Width 1 will be used to compute for the valid values of Bar/Space Widths 2, 3 and 4 based on
the ratios given. When Bar/Space Width 1 is invalid, all Bar/Space Width fields will be defaulted
regardless if the values for Bar/Space Widths 2, 3 and 4 are valid or not.
/FontName name See these
sections:
• Values for /
EmbedText
key
• Values for /
FontName
key
/Courier-Bold Optional.
Defines how the HRT is to be printed.
When the value given is not within the
defined range:
• If the value is of type name, the value
will be set to default (/Courier-Bold)
• If the value is of any other type, a
TYPECHECK error will be returned.
/QuietZone [int int] Min: [0 0] (dec)
Max: [1200
1200] (dec)
• [150 150]
(dec)
or
• [96 96]
(hex)
Optional.
Note: Values less than the minimum will
use the default value of [150 150].
Key Type Range Default value Description
To Next Page
Loading...
