15
Changing the fax settings
Use the operator panel or the software to change the fax type, resolution,
and contrast.
Speed-dialing
You can program up to 70 speed-dial numbers using the Settings Utility.
You can store up to 59 individual names and numbers, ten small-group
numbers to speed-dial a fax to groups of people on your individual list, and
one large-group number to speed-dial a fax to all of the individuals and
groups listed. Each speed-dial entry can be a fax number or an e-mail
address. To program speed-dial entries for your All-In-One, click
Start Programs Lexmark X125 Lexmark X125 Settings
Utility fax Setup.
To send a fax using a programmed speed-dial entry:
1 Press Speed Dial (the # button).
2 Press Options to select the speed-dial destination, or enter a
speed-dial number using the operator panel keypad.
3 Press Start/Yes.
To print a list of all the speed-dial entries available on your system, first
press Setup, and then press Menu repeatedly until you see Print Report.
Press Options until you see Speed Dial List. Press Start/Yes to print the
report.
Using the operator panel Using the software
1 Press FAX, and then press Menu
repeatedly to review the fax settings.
2 Press Options to change the
settings.
1 Make sure you have installed the
All-In-One software. For help, see
page 1.
2 Click Start Programs Lexmark
X125 Lexmark X125 Settings
Utility.
3 Click fax.
4 Adjust the settings, and then click
OK.
To Next Page
Loading...
