EasyManuals Logo

Lexmark X466 Service Manual

Lexmark X466
310 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #70 background imageLoading...
Page #70 background image
2-32 Service Manual
7014-xxx
7XX Error occurred when sending a frame. • Check line quality.
• Adjust ‘Transmit Level’.
• Select a lower ‘Max Speed’ value
under Fax Send settings.
800 Received EOT unexpectedly from
the modem in V34 mode.
• If error persists disable V34 modulation
scheme.
802 Too many timeouts occurred
during ECM reception.
• If error persists disable ECM mode.
803 Fax cancelled by user No action needed.
804 Unexpectedly received a disconnect
command from the remote end.
• Check line quality.
• Adjust Transmit Level/Receive
Threshold values.
• Remote device could be requesting an
unsupported feature.
805 Remote fax device failed to respond to
the DCS command.
• Adjust Transmit Level/Receive
Threshold values.
• Remote device could be
malfunctioning.
808 T1 timeout occurred when trying to
establish a connection with a remote
fax device.
• Adjust Transmit Level/Receive
Threshold values.
809 T2 Timeout occurred due to loss of
command/response synchronization.
• Adjust Transmit Level/Receive
Threshold values.
80A T5 Timeout occurred when transmitting
image data to remote fax device.
• Check line quality.
• Adjust ‘Transmit Level’.
• Select a lower ‘Max Speed’value under
Fax Send settings.
80B Too many errors when transmitting in
ECM mode.
• Check line quality.
• Adjust ‘Transmit Level’.
• Select a lower ‘Max Speed’value under
Fax Send settings.
80C Remote device failed to respond to the
CTC command.
• Select a lower ‘Max Speed’ value
under Fax Send settings.
• Adjust ‘Transmit Level’.
80D Received too many requests from
remote end to repeat the previous
command sent.
• Check line quality.
• Adjust ‘Transmit Level’.
• Check if line conditions on remote end
will facilitate a good connection.
80E Functional limitation- Remote fax
device does not support G3 receive
capability.
No action needed. Issue with the remote
device.
811 Failed to detect a fax device at the
remote end.
• Verify MFD is answering to fax call and
not a voice call.
• Decrease value of ‘Rings To Answer’
setting.
812 No more data rates available in V34
modulation scheme.
• Adjust to a lower modulation scheme.
Fax error log codes (Continued)
Error code Description Action

Table of Contents

Other manuals for Lexmark X466

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lexmark X466 and is the answer not in the manual?

Lexmark X466 Specifications

General IconGeneral
Print Resolution1200 x 1200 dpi
Processor Speed400 MHz
Fax Speed33.6 Kbps
FunctionsPrint, Copy, Scan, Fax
Operating System CompatibilityWindows, Mac, Linux
Print TechnologyLaser
Duplex PrintingYes
ConnectivityUSB, Ethernet
Paper Handling250-sheet input tray, 50-sheet multipurpose tray
Scanner TypeFlatbed, ADF
Scan Resolution1200 x 1200 dpi
TypeMultifunction
Paper Capacity300 sheets
Maximum Paper Size8.5 x 14 inches

Related product manuals