6 Lift the blue levers on the imaging kit, and then pull it toward you.
7 Press down on the blue levers, grasp the handles on the sides, and then pull the imaging kit out.
Warning—Potential Damage: Do not touch the underside of the imaging kit. This could damage the imaging
kit.
8 Remove the used developer unit.
9 Place the used developer in the enclosed package.
10 Unpack the replacement developer unit.
Leave the packaging on the developer unit.
11 Gently shake the developer unit side to side.
Maintaining the printer
183
To Next Page
Loading...
Need help?
General
