Printing on specialty media
Tips on using letterhead
Page orientation is important when printing on letterhead. Use the following table to determine which direction to
load the letterhead:
Source or process Print side and paper orientation
• Standard 250-sheet tray
• Optional 550-sheet tray
• Simplex (one-sided) printing
from trays
Printed letterhead design is placed faceup. The top edge of the sheet with the logo
is placed at the front of the tray.
Duplex (two-sided) printing from
trays
Printed letterhead design is placed facedown. The top edge of the sheet with the
logo is placed at the back of the tray.
Note: Check with the manufacturer or vendor to determine whether the chosen preprinted letterhead is acceptable for
laser printers.
Printing
53
To Next Page
Loading...
Need help?
General
