Austria, Germany, and Switzerland
There is a plug installed in the EXT port of the printer. This plug is necessary for the proper functioning of the
printer.
Note: Do not remove the plug. If you remove it, then other telecommunications devices in your home (such as
telephones or answering machines) may not work.
1 Connect one end of the telephone cable that came with the printer to the LINE port on the back of the printer.
2 Connect the other end of the telephone cable to the adapter, and then connect the adapter to the N slot of an
active analog telephone wall jack.
Note: Your telephone adapter may look different than the one shown. It will fit the telephone jack used in your
location.
Faxing
84
To Next Page
Loading...
