EasyManuals Logo

Lexmark X945 User Manual

Lexmark X945
272 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #103 background imageLoading...
Page #103 background image
Printing information pages
Printing a menu settings page
Print a menu settings page to review the current menu settings and to verify printer options are installed correctly.
1 Make sure the printer is on and Ready appears.
2 On the home screen, touch .
3 Touch Reports.
4 Touch Menu Settings Page.
Printing a network setup page
If the printer is attached to a network, print a network setup page to verify the network connection. This page also
provides important information that aids network printing configuration.
1 Make sure the printer is on and Ready appears.
2 On the home screen, touch .
3 Touch Reports.
4 Touch Menu Settings Page.
Printing a directory list
A directory list shows the resources stored in flash memory or on the hard disk.
1 Make sure the printer is on and Ready appears.
2 On the home screen, touch .
3 Touch Reports.
4 Touch repeatedly until Print Directory appears.
5 Touch Print Directory.
Printing the print quality test pages
Print the print quality test pages to isolate print quality problems.
1 Turn the printer off.
2 Hold down and while turning the printer on.
3 Release the buttons when the screen with the progress bar appears.
The printer performs a power-on sequence, and then the Configuration menu appears.
4 Touch repeatedly until Print Quality Pages appears.
5 Touch Print Quality Pages.
The print quality test pages print.
6 Touch Exit Config Menu.
103

Table of Contents

Other manuals for Lexmark X945

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lexmark X945 and is the answer not in the manual?

Lexmark X945 Specifications

General IconGeneral
BrandLexmark
ModelX945
CategoryAll in One Printer
LanguageEnglish

Related product manuals