G3 = All code pages in group G2 plus code pages (CPGIDs) 437 and 850.
S = See descriptions under Special Code Pages below.
In addition to the above set of fonts, a number of other FGIDs are also recognized by the IPDS printer
emulation. These are simulated by substitution with one of the above fonts or by bolding one of the above
fonts. See Font Substitution on page 100.
If an FGID is not available, the font will be mapped to another font either at the host or in the printer
using a font best-fit algorithm.
Special Code Pages
The following special code pages are supported when the Resident emulation is selected.
Language / Function / Description
APL (Graphic Escape APL/TN)
To Next Page
Loading...
