5 Insert the new pick roller until it clicks into place.
6 Insert the tray.
7 Connect the power cord to the electrical outlet, and then turn on the printer.
CAUTION—POTENTIAL INJURY: To avoid the risk of fire or electrical shock, connect the power cord
to an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.
Replacing the pick roller in the multipurpose feeder
1
Turn o the printer, and then unplug the power cord from the electrical outlet.
2 Open the multipurpose feeder.
Maintaining the printer 73
To Next Page
Loading...
Need help?
General