EasyManua.ls Logo

Lexus 2004 LS430 - Check Park Sonar Message; Clean Park Sonar Message; Clearn Radar Sensor Message

Lexus 2004 LS430
550 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GAUGES, METERS AND SERVICE REMINDER INDICATORS
100
w285
If the sensor of the Lexus park assist system is
malfunctioning or a cable is broken when the Lexus park
assist
system is on, the master warning light comes on, a
warning tone sounds, the malfunctioning sensor flashes
and the above message appears.
The flashing sensor does not operate properly. Although it is
no problem to continue driving, have your vehicle checked by
your Lexus dealer as soon as possible.
w286
If icicles, snowflakes or mud gets on the sensor of the
Lexus park assist system or it is frozen when the Lexus
park assist system is on, the sensor not be able to detect
an obstacle flashes and the above message appears.
Remove the foreign matter or deice the sensor
. If the message
does not appear after cleaning, the system is operating
properly.
w279
Dynamic radar cruise control—
If the system cannot easily measure the
vehicle-to-vehicle distance because of a dirty millimeter
wave radar sensor or grille cover while the dynamic radar
cruise control is on, the master warning light comes on
and the “CRUISE” indicator light flashes. At this time a
warning tone sounds and the above message appears.
If this message appears, clean the sensor and grille cover with
a soft cloth and try setting the preset speed again. If the dirt
is removed without cleaning, the system will automatically
enter the “RADAR READY” mode. If the system does not enter
the “RADAR READY” mode even after cleaning or the
message remains on the display, the system might be
malfunctioning. Although it is no problem to continue driving,
contact your Lexus dealer.

Table of Contents

Related product manuals