AUDIO
274
20L139a
To scan the currently selected channel category : Push the
“SCAN” button briefly. “SCAN” appears on the display. The
radio will find the next channel in the same channel category
up the band, stay there for a few seconds, and then scan again.
To select a channel, push the “SCAN” button a second time.
To scan the preset channels: Push the “SCAN” button and
hold it until you hear a beep. “P.SCAN” appears on the display.
The radio will tune in the next preset channel , stay there for a
few seconds, and then move to the next preset channel. To
select a channel, push the “SCAN” button a second time.
(f) Channel category
20L364
When you push the TYPE “ ” or “ ” button, the current
channel category appears on the display.
When the channel category appears, push either “ ” or “ ”
button to switch to the next or previous category.
To Next Page
Loading...
