OCCUPANT RESTRAINT SYSTEMS
161
CAUTION
D If you operate the switch when an occupant is seated
or when he/she is getting on or off the front
passenger seat, take full safety precautions
beforehand by telling the occupant that the seat is
about to move.
D To reduce the risk of sliding under the lap belt during
a collision, avoid reclining the seatback any more
than needed. The seat belts provide maximum
protection in a frontal or rear collision when the front
passenger is sitting up straight and well back in the
seats. If he/she is reclined, the lap belt may slide past
his/her hips and apply restraint forces directly to the
abdomen. In the event of a frontal collision, the more
the seat is reclined, the greater the risk of personal
injury.
REAR SEATS
Adjusting rear power seats
16L630
"
1
Seat position control switches
2
Head restraint height control switches
3
Refreshing rear seat switches
The rear power seat control switches are located in the rear
armrest.
For the operation of head restraints and refreshing rear seat
switches, see “Head restraints” on page 164 and “Refreshing
rear seat switches” on page 76.
To Next Page
Loading...
