SWITCHES
71
CLIMATE CONTROL SEAT
SWITCHES
The climate control seat feeds air at the temperature you
desire from the seat surface, for the comfort of the
occupants.
Front climate control seats
12L175
"
1
For driver’s seat
2
For front passenger’s seat
3
Air at room temperature
4
Cool air
5
Warm air
The front climate control seat has two switches: one
marked “L” (for the front left seat) and the other marked
“R” (for the front right seat).
The ignition switch must be in the “ON” position.
The front climate control seat has three modes: air at room
temperature, cool air and warm air.
To use the front seat climate control, push the knob to pop
it out and then turn the knob. The indicator light comes
on.
To feed air at room temperature, turn the knob to the gray
zone.
To feed cool air, turn the knob counterclockwise and set the
knob in the blue zone. Three setting levels are available.
To feed warm air, turn the knob clockwise and set the knob in
the red zone. Three setting levels are available.
After the switch is turned on, it takes several minutes until you
feel warm or cool.
To disable this function, turn the knob to the center position (the
gray dot). The indicator light goes off.
Push the knob into the recessed position when not in use.
To Next Page
Loading...
Need help?
General
