AUDIO
282
20L145b
D Ejecting a single disc:
1. Push the button under the “ ” or “ ” signal on the
display to display the disc number you want to eject.
2. Push the “ ” (eject) button briefly.
At this time, the display shows “EJECT” and the indicators at
both ends of the slot as well as the disc number light up.
D Ejecting all the discs:
Push the “
” (eject) button until you hear a beep.
However, if you accidentally pushed the “
” (eject) button,
push the “DISC” or “LOAD” button to insert the disc again.
Do not push in the disc which is being ejected forcibly.
(b) Playing a compact disc
20L366
Push the “DISC” button if the discs are already loaded in
the player.
“CD” appears on the display.
The discs set in the player are played continuously, starting
with the last disc you inserted. The disc number of the disc
currently being played, the track number and the time from the
beginning of the program appear on the display.
When play of one disc ends, the first track of the following disc
starts. When play of the final disc ends, play of the first disc
starts again.
The player will skip any empty disc number.
To Next Page
Loading...
