OCCUPANT RESTRAINT SYSTEMS
215
16L305a
TO USE THE ANCHOR BRACKET
1. Push the lid of the anchor bracket to open it.
16L563a
2. Fix the child restraint system with the seat belt.
3. Latch the hook onto the anchor bracket and tighten the
top strap.
When using a top strap in the outside rear seat, the head
restraint should be lowered down fully and moved rearward.
For the center rear seat, the head restraint should be in the
original position. Then make sure to pass the top strap over the
head restraint.
For instructions to install the child restraint system, see “Types
of child restraint system” on page 200.
When the child restraint is not in use, make sure the head
restraint is mounted.
To Next Page
Loading...
