STEERING WHEEL AND MIRRORS
230
Power rear view mirror control
16L641
"
1
Master switch
2
Control switch
To adjust the power rear view mirror, first place the master
switch at “L” (left) or “R” (right), and push the control
switch on the desired side.
The power rear view mirrors can be adjusted when the ignition
switch is in the “ACC” or “ON” position.
When you are backing up, you can adjust the mirrors
down quickly by the following operations with the ignition
ON.
D Put the selector lever in the “R” position.
D Place the master switch at “L” (left) or “R” (right).
The mirrors return to the previous position by any of the
following operations.
D Put the selector lever in a position other than “R”.
D Place the master switch in the neutral position.
D Turn the ignition switch to the “ACC” position.
NOTICE
If ice should jam the mirror, do not operate the control
or scrape the mirror face. Use a spray de-icer to free the
mirror.
To Next Page
Loading...
