ELECTRICAL COMPONENTS
515
CHECKING THE HEADLIGHT AIM
64L228
"
1
Vertical movement adjusting bolt 1
2
Vertical movement adjusting bolt 2
Before checking the headlight aim:
1. Be sure that the body around the headlight is not deformed.
2. Park the vehicle on a level spot.
3. Get into the driver’s seat and put the vehicle in a state ready
for driving (with a full tank).
4. Bounce the vehicle several times.
Adjusting the vertical aiming
64L229
1. Turn the vertical movement adjusting bolt 1 in either
direction using a Phillips-head screwdriver. At this time, keep
the turning direction and number of turns in mind.
To Next Page
Loading...
