AUDIO
273
(d) Presetting a channel
20L472
1. Tune in the desired channel.
2. Push one of the channel selector buttons ( 1-6 ) and
hold it until a beep is heard. This sets the channel to the
button and the button number ( 1- 6 ) appears on the
display.
Each button can store three SAT channels. To change the
preset channel to a different one, follow the same procedure.
The preset channel memory is cancelled when the power
source is interrupted by battery disconnection or a blown fuse.
(e) Selecting a channel
Tune in the desired channel using one of the following
methods.
20L473
Preset tuning: Push the button ( 1-6 ) for the channel you
want. The button number ( 1-6 ) and channel number appear
on the display.
To Next Page
Loading...
