OCCUPANT RESTRAINT SYSTEMS
223
REAR SEAT POSITION MEMORY
SYSTEM
A microcomputer will memorize the position of the rear seats
and the height of the rear head restraints.
Recording the rear seat position in the computer’s memory can
only be done when the ignition switch is in the “ON” position.
Setting the rear seat position
16L301a
1. Adjust the rear seat position and the height of the head
restraint of the rear seat to the desired position.
2. Keep pushing the “SET” button until a beep sounds.
The beep sound means that the position has been memorized.
The memory will be erased when the battery is removed for
inspection or service.
Recalling the memorized position
16L302a
Keep pressing the “M” button until a beep sounds; the
rear seat and rear head restraint positions will be
automatically adjusted to the memorized position.
If the “M” switch is pushed while the memorized position profile
is being activated, the operation will stop.
Do not place anything under the rear seat as this might
interfere with seat movement.
To Next Page
Loading...
Need help?
General
