EasyManuals Logo

Lexus NX 200t User Manual

Lexus NX 200t
681 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #265 background imageLoading...
Page #265 background image
265
4-5. Using the driving support systems
4
Driving
NX200t_OM_USA_OM78145U
Steering control function
In addition to the operation conditions for the lane deviation alert function,
when all of the following conditions are fulfilled, it operates.
When settings for the “Steering Assist” in the “Settings display” of the multi-
information display is set to “On” (P. 268)
When the vehicle has not slowed down more than a defined setting.
When the steering wheel is operated with a steering force level that is not
equivalent to changing lanes.
When the ABS, VSC, TRAC, or PCS (if equipped) is not operating.
When intentional accelerator pedal operations are not performed.
Lane deviation alert function
In any of the following cases, the lane deviation alert function will be tempo-
rarily canceled. When the conditions, in which the cancelation occurred
improves, the function will resume operations.
The vehicle speed deviates from the operating ranges of the function
The turn signal lever is operated
When the emergency flashers are operated
When the lane markers cannot be recognized while driving
When the system malfunctions
Immediately after the lane deviation alert operates
The lane deviation alert function will not operate again for a several sec-
onds after it has been activated, even if the vehicle leaves the lane again.
When more than half of the vehicle body straddles the lane
Steering control function
In addition to the temporary cancelation conditions of the lane deviation alert
function, in any of the following cases the steering control function is tempo-
rarily canceled. When the conditions for which the cancelation occurred
improves, the function will restart operations.
When the vehicle has slowed down more than a defined setting.
When the steering wheel is operated with a steering force level that is
equivalent to changing lanes.
When the ABS, VSC, TRAC, or PCS (if equipped) is operating.
When intentional accelerator pedal operations are performed.
Operations of the VSC and TRAC have been turned off (P. 301)
Temporary cancelation of the functions

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lexus NX 200t and is the answer not in the manual?

Lexus NX 200t Specifications

General IconGeneral
BrandLexus
ModelNX 200t
CategoryAutomobile
LanguageEnglish

Related product manuals