127
1-8. Obtaining the correct driving posture
1
Before driving
in accordance with power switch mode and
the driver’s seat belt condition.
Adjust the position of the inside rear
view mirror so that the correct driving
posture can be achieved.
Adjust the inside rear view mirror verti-
cally by grasping and moving it.
The Digital Rear-view Mirror is a sys-
tem that uses the camera on the rear of
the vehicle and displays its image on
the display of the Digital Rear-view
Mirror.
The Digital Rear-view Mirror can be
changed between optical mirror mode
and digital mirror mode by operating
the lever.
The Digital Rear-view Mirror allows the
driver to see the rear view despite
obstructions, such as the head
restraints or luggage, ensuring rear vis-
ibility. Also, the rear seats are not dis-
played and privacy of the passengers is
enhanced.
Camera indicator
Indicates that the camera is operating nor-
mally.
Icon display area
Adjusting the position of the
inside rear view mirror
WARNING
Do not adjust the position of the mirror
while driving.
Digital Rear-view mirror effort
and caution (if equipped)
WARNING
■ Before using the Digital Rear-view
Mirror
Observe the following precautions. Fail-
ure to do so may result in death or seri-
ous injury.
● Make sure to adjust the mirror before
driving.
• Change to optical mirror mode and
adjust the position of the Digital
Rear-view Mirror so that the area
behind your vehicle can be viewed
properly.
• Change to digital mirror mode and
adjust the display settings.
● As the range of the image displayed by
the Digital Rear-view Mirror is differ-
ent from that of the optical mirror,
make sure to check this difference
before driving.
System components of the Digi-
tal Rear-view Mirror
A
B
To Next Page
Loading...
