175
3-2. Driving when the surrounding area is bright
3
Driving according to the conditions
3-2.Driving wh en the surrounding area i s bright
1 To set the visor in the forward posi-
tion, flip it down.
2 To set the visor in the side position,
flip down, unhook, and swing it to
the side.
3 To use the side extender, place the
visor in the side position, then slide
it backward.
This function turns on each time the
power switch is turned to ON.
■ To prevent sensor malfunction
Do not touch or cover the sensors. Doing
so may cause the sensor to malfunction.
Using the sun visors Inside rear view mirror
anti-glare function (vehicles
with auto anti-glare inside
rear view mirror)
Responding to the level of bright-
ness of the headlights of vehicles
behind, the reflected light is auto-
matically reduced.
To Next Page
Loading...
