174
3-1. Driving when the surrounding area is dark
1 Pull the lever rearward and then
return it to its original position.
The high beams will illuminate while the
lever is pulled, however, after the lever
is returned to its original position, the
low beams will remain on for a certain
amount of time. After this, the Auto-
matic High Beam system will operate.
Temporarily changing to the low
beams
It is recommended to switch to the
low beams when use of the high
beams is inappropriate or when the
high beams may cause problems or
distress to other drivers or pedes-
trians nearby.
To Next Page
Loading...
