Lexus RZ450E 2023 - Page 159

159
2-3. Parking the vehicle
2
Driving the vehicle
 Vehicles with auto anti-glare inside
rear view mirror
 Vehicles with Digital Rearview Mir-
ror
3 Program a device.
 Vehicles with auto anti-glare inside
rear view mirror
 Vehicles with Digital Rearview Mir-
ror
 Programming a device other than
an entry gate (for U.S.A. owners):
Press and hold the remote control trans-
mitter button until the HomeLink
®
indica-
tor light changes from slowly flashing
orange to rapidly flashing green (rolling
code) or continuously lit green (fixed
code), then release the button.
 Programming an entry gate (for
U.S.A. owners)/Programming a
device in the Canadian market:
Press and release the remote control trans-
mitter button at 2 second intervals, repeat-
edly, until the HomeLink
®
indicator light
changes from slowly flashing (orange) to
rapidly flashing (green) (rolling code) or
continuously lit (green) (fixed code).
4 Test the HomeLink
®
operation by
pressing the newly programmed
button and observing the indicator
light:
 HomeLink
®
indicator light illumi-
nates: Programming of a fixed code
device has completed. The garage
door or other device should operate
when a HomeLink
®
button is
pressed and released.
 HomeLink
®
indicator light flashes