360
6-2. Using the safe driving support functions
● When backing out of a sharp angle park-
ing spot
● Immediately after the RCTA function is
turned on
● Immediately after the EV system is
started with the RCTA function on
● When the sensors cannot detect a vehi-
cle due to obstructions
● When towing with the vehicle
● When there is a significant difference in
height between your vehicle and the
vehicle that enters the detection area
● When a sensor or the area around a sen-
sor is extremely hot or cold.
● If the suspension has been modified or
tires of a size other than specified are
installed
● If the front of the vehicle is raised or low-
ered due to the carried load
● When turning while backing up
● When a vehicle turns into the detection
area
■ Situations in which the system may
operate even if there is no possibility of a
collision
Instances of the RCTA function unneces-
sary detecting a vehicle and/or object may
increase in the following situations:
● When the parking space faces a street
and vehicles are being driven on the
street
● When the distance between your vehicle
and metal objects, such as a guardrail,
wall, sign, or parked vehicle, which may
reflect electrical waves toward the rear of
the vehicle, is short
To Next Page
Loading...
