538
9-6. If the EV system cannot be used normally
AC charging connector is also connected.
DC charging and AC charging cannot be
performed together.
The EV system is started.
When the EV system is started, DC
charging cannot be started.
Also, if the shift position is not in P, DC
charging cannot be performed.
When DC charging is interrupted
Cause Remedy
Cause Remedy
The timer for the DC charger operates.
Depending on the type of the DC charger,
the timer may be set to stop charging after a
certain time.
Check with the charging station manager.
The power for the DC charger is off.
Check the power status of the DC charger. If
there are uncertainties with the power status,
contact the charging station manager.
The temperature of the traction battery is
extremely high or low.
DC charging may not be performed in
extremely high or extremely low tempera-
ture environments. Charge the traction bat-
tery after the temperature has been
stabilized.
Error is detected by the DC charger or vehi-
cle’s system check.
There may be a malfunction with the DC
charger or charging system.
If there is a malfunction with the DC char-
ger, contact the facility manager.
If there is not a malfunction with the DC
charger, there may be a malfunction in the
system. Contact your Lexus dealer.
If the EV system cannot be started, con-
tact your Lexus dealer.
High temperature of charging related parts
If the temperature of charging related parts
is high, DC charging may not be possible.
Wait for a while and then charge again.
The electrical components such as the air
conditioning system stop operating while the
traction battery is approximately fully
charged.
Keep the electrical components such as the
air conditioning system in the OFF state, and
then perform the charging procedure again.
To Next Page
Loading...
