93
1-6. Entering/exiting the vehicle
1
Before driving
1 Locks all the doors
Check that the door is securely locked.
2 Unlocks all the doors
Pressing the button unlocks the driver’s
door. Pressing the button again within 3
seconds unlocks the other doors.
■ Theft deterrent panic mode
When is pressed for longer than
about 1 second, an alarm will sound inter-
mittently and the vehicle lights will flash to
deter any person from trying to break into
or damage your vehicle.
To stop the alarm, press any button on the
electronic key.
■ Switching the door unlock function
It is possible to set which doors the entry
function unlocks using the wireless remote
control.
1 Turn the power switch off.
2 When the indicator light on the key sur-
face is not on, press and hold ,
(if equipped) or for
approximately 5 seconds while press-
ing and holding .
The setting changes each time an oper-
ation is performed, as shown below.
(When changing the setting continu-
ously, release the buttons, wait for at
least 5 seconds, and repeat step 2.)
To prevent unintended triggering of the
alarm, unlock the doors using the wireless
remote control and open and close a door
once after the settings have been changed.
(If a door is not opened within 60 seconds
after is pressed, the doors will be
locked again and the alarm will automati-
cally be set.)In a case that the alarm is trig-
gered, immediately stop the alarm.
■ Customization
Some functions can be customized.
(P.583)
The vehicle can be locked and
unlocked using the entry function,
Operations using the wireless
remote control
Lock/unlock the doors using
wireless remote control
Multi-information
display/Beep
Unlocking function
Exterior: Beeps 3
times
Holding the driver’s
door handle unlocks
only the driver’s
door.
Holding any of the
passenger door
handles unlocks all
the doors.
Exterior: Beeps
twice
Holding a door han-
dle unlocks all the
doors.
Using the door lock switches
To Next Page
Loading...
