109
3-2. Opening, closing and locking the doors
3
Before driving
in the following situations.
● When a large amount of water is applied
to the rear bumper, such as when the
vehicle is being washed or in heavy rain
● When dirt is wiped off the rear bumper
● When a small animal or small object, such
as a ball, moves under the rear bumper
● When an object is moved from under the
rear bumper
● If someone is swinging their legs while sit-
ting on the rear bumper
● If the legs or another part of someone’s
body contacts the rear bumper while
passing by the vehicle
● When the vehicle is parked near an elec-
trical noise source which affects the sen-
sitivity of the Hands Free Power Back
Door, such as a pay parking spot, gas sta-
tion, electrically heated road, or fluores-
cent light
● When the vehicle is near a TV tower,
electric power plant, radio station, large
display, airport or other facility that gen-
erates strong radio waves or electrical
noise
● When the vehicle is parked in a place
where objects such as plants are near the
rear bumper
● If luggage, etc. is set near the rear
bumper
● If accessories or a vehicle cover is
installed/removed near the rear bumper
● When the vehicle is being towed
To prevent unintentional operation, turn the
Hands Free Power Back Door operation
setting off.
■ When reconnecting the battery
To enable the power back door to operate
properly, close the back door manually.
■ Jam protection function
Sensors are installed in the right and left
sides of the power back door. When the
door is automatically closing and the sen-
sors are pushed due to an object being
clamped, etc., the jam protection function
operates.
From that position the door automatically
moves a little in the opposite direction and
then the function stops.
■ If the back door opener is inoperative
The back door can be unlocked from the
inside.
1 Remove the cover.
To protect the cover, place a rag between
the flathead screwdriver and the cover as
shown in the illustration.
2 Move the lever.
■ Customization
Some functions can be customized. (Cus-
tomizable features: P.416)