EasyManua.ls Logo

Lexus UX200 2021 - Parking Support Brake Function (Rear-Crossing Vehicles)

Lexus UX200 2021
456 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
242
4-5. Using the driving support systems
*
:If equipped
This function will operate in situations
such as the following if a vehicle is
detected in the traveling direction of
the vehicle.
When reversing, a vehicle is
approaching and the brake pedal is
not depressed, or is depressed late
P.217
The Parking Support Brake function
(rear-crossing vehicles) will operate
when
The function will operate when the PKSB
OFF indicator is not illuminated or flashing
(P.69, 70) and all of the following condi-
tions are met:
Engine output restriction control
The Parking Support Brake is enabled.
The vehicle speed is 10 mph (15 km/h) or
less.
Vehicles are approaching from the right
or left at the rear of the vehicle at a travel-
ing speed of more than approximately 5
mph (8 km/h)
The shift lever is in R.
The Parking Support Brake determines
that a stronger than normal brake opera-
tion is necessary to avoid a collision with
Parking Support Brake
function (rear-crossing vehi-
cles)
*
If a rear radar sensor detects a
vehicle approaching from the right
or left at the rear of the vehicle and
the system determines that the pos-
sibility of a collision is high, this
function will perform brake control
to reduce the likelihood of an
impact with the approaching vehi-
cle.
Examples of function operation
Types of sensors
WARNING
To ensure the Parking Support Brake
(rear-crossing vehicles) can operate
properly
Observe the following precautions
regarding the rear radar sensors
(P.217). Failure to do so may cause a
sensor to not operate properly, and may
cause an accident.
Do not modify, disassemble or paint
the sensors.
Do not replace a rear radar sensor
with a part other than a genuine part.
Do not damage the rear radar sensors,
and always keep the radar sensors and
their surrounding area on the bumper
clean.
To prevent a rear radar sensor from
malfunctioning
If the area around a rear radar sensor
is subjected to an impact, the system
may not operate properly due to a
sensor malfunction. Have the vehicle
inspected by your Lexus dealer.
Observe the rear radar sensor han-
dling precautions. (P.217)

Table of Contents

Related product manuals