Description
GA10218_002_C0 - 10/2016 - © Leybold GmbH 25
Sniffer line
With the use of a sniffer line the PHOENIX L300i can easily be converted to a sniffer
leak detector.
Available versions:
SL300: 4 m
SL301: 4 m and 10 m
For further information on the sniffer lines SL300 and SL301 see the enclosed
manuals.
Remote Control RC310WL Wireless and RC310C Wired
For further information on the remote controls RC310WL and RC310C see instruc-
tion manual with the document number 300306406_002_A1.
Partial Flow System (PHOENIX L300i and PHOENIX L300i
In the partial flow mode the test sample is additionally evacuated by an auxiliary
pump. Using the optional partial flow pump set offers to the user the following
advantages:
- faster response time
- entry into the measurement mode already at an inlet pressure of 1000 mbar
- faster venting of large test objects
The partial flow system consists of the components partial flow valve block, right
angle valve DN 25 KF, control cable and vacuum hose with flange connections.
The partial flow valve block with the right angle valve has to be connected to the
inlet flange of the PHOENIX L300i. Connect the control cable to the Option port
and the vacuum hose to the auxiliary pump. The PHOENIX L300i has to be
configurated as described in chapter.
For further detailed information please refer to operating instructions GA 10.277
partial flow system.
Fig. 8 Remote Control RC310WL wireless
Sniffer line
Remote control
Partial flow system
To Next Page
Loading...
