Operation
78
GA10218_002_C0 - 10/2016 - © Leybold GmbH
3.10.5 Parameter Save/Load
Main menu > Settings > Parameter save load
Enables to save and load individual settings or reload the default settings.
Load parameter set
Main menu > Settings > Parameter save load > Load parameter set
Save the current parameter settings.
Save parameter set
Main menu > Settings > Parameter save load > Save parameter set
The settings of the selected saved parameter set will be displayed and can be
reloaded.
3.10.6 Monitoring Functions
Main menu > Settings > Monitoring functions
This Submenu explains the monitoring functions.
Softkey 2 to 4: The names of the current values can be saved under a
free selectable name. The saving of 3 different sets is
possible.
Softkey 5: load default values
The factory settings will be loaded again.
Softkey 6 to 8: One of three saved parameter sets can be loaded.
Softkey 4: Edit a file name
Rename the parameter set.
Softkey 8: Save
Save the edited parameter set.
Softkey 6:
Upward to the previous screen.
Softkey 7:
Downward to the next screen.
Softkey No. 3: Maximum evacuation time
Settings for the gross leak measurement
Softkey No. 4: Contamination protection
Set the switch off limit and enable the function
Softkey No. 6: Pressure limits for vacuum mode
Setting for the pressure limits between evacuation, Gross and Fine
mode.
Load parameter set
Save parameter set
To Next Page
Loading...
